FastenMaster Cortex For Boral Trim – 50 Linear Feet

Original price was: $32.97.Current price is: $23.08.

Compatible with Boral Trim
Box of 75 screws, 100 plugs, and setting tool
Plugs are made from manufacturer OEM trim boards, ensuring plugs match the trim
Trim fasteners conceal the heads of the fasteners when installing trim boards
TORX(R) ttap(R) Drive System
Traditional plugs are smooth
Frontier plugs are wood grain

Shop the Best Quality Online

The quality you expect, the service you deserve.

Get the Best for Less

Product guarantee 100% satisfaction

The FastenMaster Cortex for Boral Trim – 50 Linear Feet is a fast and easy way to conceal fasteners and screw heads when installing PVC trim Boards. Cortex is easy-to-use and includes everything needed, including (75) screws, (100) plugs, and a setting tool. FastenMaster recommends installing with an 18 volt cordless impact drill. The Cortex for Trim Fastening System is designed for use with PVC Trim with an actual thickness of 5/8″ to 5/4″.

How many fasteners are needed? Horizontal trim boards less than 12″ wide, use two Cortex fasteners at every framing member-rafter tail or wall stud. The screws should be 16″ OC or closer. Vertical trim boards (i.e., next to a door or a window), use two Cortex fasteners every 16″ OC or closer. If a trim board is 12″ or wider, use three screws. Each trim board must be fastened within two inches of the end of each board. Note: Predrilling is not required throughout the majority of the project. Predrilling is required when fastening within 1/2″ of the end of a board and at mitered joints. Use a 3/16″ drill bit for predrilled pilot holes.